Please wait while the page loads...

2012 Ram 3500 Check Engine Light Flashing

Although there are countless capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several prevalent causes consisting something as unmistakable as a loose gas cap. Contrasting prevalent reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name many. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was revamped.

Every 2012 Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its applicable systems. The sensors are continually detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is incorrect nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service experienced.

Is it safe to drive your 2012 Ram 3500 with the check engine light on?

If the check engine light is flashing, this means that there is a unsafe issue and it is recommended to service your Ram 3500 immediately. This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a feasible glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more unhealthy problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2012 Ram to our certified mechanics as soon as functional.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is twinkling, we suggest that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help represent if your vehicle is protected to drive in or if we suggest a tow truck. Since each check engine code has its own level of severity, it is hard to predict how bountiful miles you can drive with the warning light on.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2012 Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few correct ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2012 Ram 3500. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of assorted things. It can be as effortless as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2012 Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can aid you read what code is turning your check engine light on or inspect why your check engine light is flashing.

2012 Ram 3500 Check Engine Light

If the check engine light in your 2012 Ram 3500 starts flashing, that means that the problem needs immediate attention and your Ram should be brought in immediately. A flashing light indicates that the problem is unsafe and if not taken care of immediately may result in dominant damage to the vehicle. This flashing light usually hints a laborious engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is attainable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A detrimental, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro immediately by calling 3368951348.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is mostly between $88 and $111. The great news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it great to get the correct code reading and diagnosis.

What could cause the check engine light to come on in a 2012 Ram 3500?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a great repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow constantly means something less serious but a flashing check engine light hints that your vehicle’s engine is in serious trouble and service is needed today. If your check engine light is flashing in your 2012 Ram 3500, we highly advocate not to drive the vehicle and schedule Ram service now. Below is a list of the most prevailing reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less reasonable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2012 Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to pick the right mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 3500 is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to favorable changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • The battery is low or dead. The battery in your 2012 Ram 3500 is every harsh. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our contemporary service coupons and specials.
  • Your 2012 Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a wide mixture of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, chiefly if they’re exposed to imposing heat or extreme cold.
  • New Spark Plugs or Plug Wires are decisive for your 2012 Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more lavish repairs.
  • One of the most acknowledged and plentiful cause is that your 2012 Ram 3500 gas cap is loose, damaged or missing. The gas cap for your 2012 Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on abruptly after you put gas in your 2012 Ram 3500, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2012 Ram 3500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is typically caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2012 Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2012 Ram 3500 if it’s not installed perfectly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound conscious, bring your 3500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.

Will the check engine light reset itself?

The check engine light on your 2012 Ram 3500 will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did good of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2012 Ram 3500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

Check Engine Light Service 2012 Ram 3500

What do you do when you’re driving along in your Ram 3500 and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2012 Ram 3500 checked as soon as conceivable. Ignoring that warning could end up causing expanded damage to expensive engine components.

When your 2012 Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t definite, a computer turns on your check engine light. This amber or yellow light is naturally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized diagnose tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you favor that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an effective mechanical to determine the issue and repair it.

2012 Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also appreciative as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling primary diagnostics will give you sane knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Sadly, specific and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Ignition system faults
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Bad Spark Plugs
  • O2 Sensor
  • Old Battery
  • Emissions controls issues
  • Computer output circuit issues

This is why it is curious for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! If the engine light comes on due to a productive concern, you risk damaging your car extra by not repairing the issue right away.