Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2013 Chrysler 300 will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going practical, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Chrysler 300 light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The convenient news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to assist read the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it convenient to get the innate code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most constantly misunderstood lights or indicators in your 2013 Chrysler 300 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2013 Chrysler 300. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of distinctive things. It can be as familiar as your gas cap being loose or as exacting as engine knocking. If your check engine light is on in your 2013 Chrysler 300, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Chrysler service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

What could cause the check engine light to come on in a 2013 Chrysler 300?

When your check engine light comes on, this could be as real as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a exemplary repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow mostly means something less relentless but a flashing check engine light suggests that your vehicle’s engine is in relentless trouble and service is mandatory rapidly. If your check engine light is flashing in your 2013 Chrysler 300, we exceedingly recommend not to drive the vehicle and schedule Chrysler service today. Below is a list of the most real reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chrysler 300 is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Chrysler 300 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Your 2013 Chrysler 300 has a vacuum leak. Every Chrysler 300 has a vacuum system that performs a wide collection of functions. The vacuum system also helps lower aggressive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme irate.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, classical as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less pragmatic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause break to your catalytic converter and your 2013 Chrysler 300's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to learn the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • One of the most beneficial and frequent cause is that your 2013 Chrysler 300 gas cap is loose, damaged or missing. The gas cap for your 2013 Chrysler 300 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2013 Chrysler 300, earliest thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2013 Chrysler 300’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Chrysler 300 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • The battery is low or dead. The battery in your 2013 Chrysler 300 is every noteworthy. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Chrysler you commute, but check our existing service coupons and specials.
  • New Spark Plugs or Plug Wires are essential for your 2013 Chrysler 300. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or break to ignition coils and O2 sensors, central to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Chrysler 300 if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound usual, bring your 300 to Chrysler and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might price a tiny bit more but could save you money from having to get poor work and break caused by poor installation work corrected.

Check Engine Light Service 2013 Chrysler 300

What do you do when you’re driving along in your Chrysler 300 and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Chrysler 300 checked as soon as attainable. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2013 Chrysler 300's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic probe tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained skilled to mean the issue and repair it.

2013 Chrysler 300 Check Engine Light

If the check engine light in your 2013 Chrysler 300 starts flashing, that means that the problem needs hasty attention and your Chrysler should be brought in quickly. A flashing light indicates that the problem is risky and if not taken care of quickly may result in major damage to the vehicle. This blinking light generally indicates a rigorous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously improve the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, classical or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our company of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro immediately by calling 3368951348.

2013 Chrysler 300 Check Engine Light Flashing

Although there are frequent possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable accepted causes including something as convenient as a loose gas cap. Alternative accepted reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was revamped.

Every 2013 Chrysler 300 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its troublesome systems. The sensors are continually detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is mistaken nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Incredibly Qualified Service mechanical.

Is it safe to drive your 2013 Chrysler 300 with the check engine light on?

This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more dangerous problem. If the check engine light is flashing, this means that there is a dangerous issue and it is recommended to service your Chrysler 300 immediately. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lessen your speed and deliver your 2013 Chrysler to our certified mechanics as soon as suitable.

2013 Chrysler 300 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 300. There are hundreds of additional codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling primary diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Sadly, discernable and colossal vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of compelling OBD codes, there are also hundreds of compelling reasons for the light, including:

  • Bad Spark Plugs
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Old Battery
  • Computer output circuit issues
  • O2 Sensor
  • Transmission issues
  • Ignition system faults

This is why it is exceptional for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Chrysler mechanic. If the engine light comes on due to a unstable concern, you risk damaging your car further by not repairing the issue right away.

How many miles can you drive with the check engine light?

Since every check engine code has its own level of severity, it is laborious to predict how many miles you can drive with the warning light on. It could be anything from a harmful sensor to plug wires needing to be interchanged. If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to aid learn if your automobile is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy appropriately.