Please wait while the page loads...

2013 Ram 2500 Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few traditional causes consisting something as fair as a loose gas cap. Other traditional reasons for a Check Engine Light are faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name several. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2013 Ram 2500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what completely is mistaken nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service effective.

Is it safe to drive your 2013 Ram 2500 with the check engine light on?

If the check engine light is flashing, this means that there is a relentless issue and it is recommended to service your Ram 2500 quickly. This question is not notably accepted because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is naturally indicated by a normal glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more relentless problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2013 Ram to our certified mechanics as soon as attainable.

Check Engine Light Service 2013 Ram 2500

What do you do when you’re driving along in your Ram 2500 and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Ram 2500 checked as soon as usable. Ignoring that warning could end up causing hefty damage to lavish engine components.

When your 2013 Ram 2500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t relevant, a computer turns on your check engine light. This amber or yellow light is continuously labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic audit tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choice that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to indicate the issue and repair it.

How many miles can you drive with the check engine light?

If you check engine light is blinking, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help choose if your vehicle is protected to drive in or if we endorse a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a contentious sensor to plug wires needing to be interchanged.

Will the check engine light reset itself?

The check engine light on your 2013 Ram 2500 will ordinarily shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going competent, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Ram 2500 light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The exceptional news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the positive code reading and diagnosis.

2013 Ram 2500 Check Engine Light

If the check engine light in your 2013 Ram 2500 starts flashing, that means that the problem needs immediate attention and your Ram should be delivered in quickly. A flashing light indicates that the problem is dangerous and if not taken care of quickly may result in enormous wear and tear to the car. This blinking light frequently indicates a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A contentious, old or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our unit of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro immediately by calling 3368951348. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2013 Ram 2500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few diverse ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2013 Ram 2500. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of distinctive things. It can be as simple as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2013 Ram 2500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

2013 Ram 2500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your 2500. There are hundreds of numerous codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling critical diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Ignition system faults
  • Transmission issues
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • O2 Sensor
  • Emissions controls issues
  • Old Battery
  • Fuel and air metering systems problems
  • Computer output circuit issues

This is why it is essential for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Ram mechanic. If the engine light comes on due to a serious concern, you risk damaging your car added by not repairing the issue right away. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

What could cause the check engine light to come on in a 2013 Ram 2500?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a competent problem that could cause competent wear and tear to your engine and come with a gigantic repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something fewer competent but a flashing check engine light implies that your vehicle’s engine is in competent trouble and service is essential immediately. If your check engine light is flashing in your 2013 Ram 2500, we tremendously recommend not to drive the vehicle and schedule Ram service today. Below is a list of the most commonplace reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Ram 2500 if it’s not installed accordingly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound common, bring your 2500 to Ram and have our team of certified technicians ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, greatly aftermarket parts and accessories, or using OEM parts initial place might estimate a microscopic bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 2500 is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Ram 2500 is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • One of the most natural and countless cause is that your 2013 Ram 2500 gas cap is loose, damaged or missing. The gas cap for your 2013 Ram 2500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2013 Ram 2500, initial thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are essential for your 2013 Ram 2500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more expensive repairs.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2013 Ram 2500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Ram 2500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Ram 2500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to find out the right mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your 2013 Ram 2500 is every crucial. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't exactly require maintenance. The estimate of a new one depends on the type of Ram you drive, but check our current service coupons and specials.
  • Your 2013 Ram 2500 has a vacuum leak. Every Ram 2500 has a vacuum system that performs a wide range of functions. The vacuum system also helps cut detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, greatly if they’re exposed to compelling heat or extreme quick.