Please wait while the page loads...

What could cause the check engine light to come on in a 2013 Ram 3500?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a threatening problem that could cause threatening damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less threatening but a flashing check engine light indicates that your vehicle’s engine is in threatening trouble and service is crucial expeditiously. If your check engine light is flashing in your 2013 Ram 3500, we greatly recommend not to travel to work the vehicle and schedule Ram service today. Below is a list of the most plain reasons your check engine light can come on:

  • Issues with all aftermarket items. An aftermarket alarm, exhaust or distinctive item can wreak havoc on your 2013 Ram 3500 if it’s not installed appropriately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound common, bring your 3500 to Ram and have our unit of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing all issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts first place might value a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 3500 is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2013 Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or long-established, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
  • The battery is low or dead. The battery in your 2013 Ram 3500 is every basic. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't surely require maintenance. The price of a new one depends on the type of Ram you drive, but check our existing service coupons and specials.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2013 Ram 3500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause distinctive problems from overheating.
  • One of the most adequate and frequent cause is that your 2013 Ram 3500 gas cap is loose, damaged or missing. The gas cap for your 2013 Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is long-established or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2013 Ram 3500, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2013 Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a heavy variety of functions. The vacuum system also helps reduction in cost harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, highly if they’re exposed to important heat or extreme cool.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, adequate as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less relevant when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the right mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a vehicle to fail an emissions test.

Check Engine Light Service 2013 Ram 3500

What do you do when you’re driving along in your Ram 3500 and abruptly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Ram 3500 checked as soon as possible. Ignoring that warning could end up causing major break to expensive engine components.

When your 2013 Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t apt, a computer turns on your check engine light. This amber or yellow light is naturally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced productive to find out the issue and repair it.

2013 Ram 3500 Check Engine Light

A flashing light implies that the problem is risky and if not taken care of hastily may result in major damage to the vehicle. If the check engine light in your 2013 Ram 3500 starts flashing, that means that the problem needs abrupt attention and your Ram should be brought in hastily. This blinking light usually indicates a stern engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can expeditiously boost the temperature of the catalytic converter to a point where damage is careful, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A bad, traditional or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive mentors at Crown Chrysler Dodge Jeep Ram Greensboro expeditiously by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly pricey repair.

Is it safe to drive your 2013 Ram 3500 with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Ram 3500 abruptly. This question is not very discernable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is consistently indicated by a intelligent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more relentless problem. Call the specialists at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2013 Ram to our certified mechanics as soon as achievable.

2013 Ram 3500 Check Engine Light Flashing

Although there are countless probable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several constitutional causes including something as affable as a loose gas cap. Other constitutional reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2013 Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is wrong nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service technological.

Will the check engine light reset itself?

The check engine light on your 2013 Ram 3500 will consistently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going compelling, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Ram 3500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2013 Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Ram 3500. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of supplemental things. It can be as apparent as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2013 Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Ram service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is not straightforward to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help represent if your vehicle is reliable to drive in or if we recommend a tow truck.

2013 Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of numerous codes that your check engine light can mean. While that sounds daunting, with a scant patience, tackling vital diagnostics will give you joyful knowledge about your vehicle and will also allow that Check Engine Light to do what it is absolutely supposed to do: be your guide. Unfortunately, understandable and fitting vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Bad Spark Plugs
  • Computer output circuit issues
  • Emissions controls issues
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Transmission issues
  • Fuel and air metering systems problems
  • O2 Sensor

This is why it is tremendous for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Ram mechanic. If the engine light comes on due to a serious concern, you risk damaging your automobile further by not repairing the issue right away. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more hazardous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it active to get the acceptable code reading and diagnosis. The intermediate rate for a check engine light diagnosis & testing is generally between $88 and $111. The active news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help represent the cause of your check engine light.