Please wait while the page loads...

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is typically between $88 and $111. The cooperative news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help illustrate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it cooperative to get the legal code reading and diagnosis.

2014 Chrysler 200 Check Engine Light Flashing

Although there are plentiful feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few common causes including something as common as a loose gas cap. Supplemental common reasons for a Check Engine Light are dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was serviced.

Every 2014 Chrysler 200 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its meaningful systems. The sensors are continually detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2014 Chrysler 200 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Chrysler 200. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a differ of odd things. It can be as uncomplicated as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your 2014 Chrysler 200, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Chrysler service department can assist you find out what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

Check Engine Light Service 2014 Chrysler 200

What do you do when you’re driving along in your Chrysler 200 and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Chrysler 200 checked as soon as essential. Ignoring that warning could end up causing great damage to expensive engine components.

When your 2014 Chrysler 200's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t accessible, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional experienced to mean the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2014 Chrysler 200 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Chrysler 200 light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help mean if your vehicle is safe to commute in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is hard to predict how frequent miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy correctly. It could be anything from a bad sensor to plug wires needing to be changed.

2014 Chrysler 200 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 200. There are hundreds of divergent codes that your check engine light can mean. While that sounds daunting, with a miniature patience, tackling convinced diagnostics will give you marvelous knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, overt and marvelous vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Computer output circuit issues
  • Transmission issues
  • Ignition system faults
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Bad Spark Plugs
  • O2 Sensor

This is why it is meaningful for someone who does not have assorted of automotive knowledge to not assume what a code means. If the engine light comes on due to a relentless concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out instantly by a certified Chrysler mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

Is it safe to drive your 2014 Chrysler 200 with the check engine light on?

If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Chrysler 200 shortly. This question is not very classic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to travel to work. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more dangerous problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2014 Chrysler to our certified mechanics as soon as potential.

What could cause the check engine light to come on in a 2014 Chrysler 200?

When your check engine light comes on, this could be as commonplace as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a great repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less risky but a flashing check engine light expresses that your vehicle’s engine is in risky trouble and service is needed instantly. If your check engine light is flashing in your 2014 Chrysler 200, we highly recommend not to drive the car and schedule Chrysler service today. Below is a list of the most commonplace reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2014 Chrysler 200 if it’s not installed well. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound practical, bring your 200 to Chrysler and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM parts initial place might value a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your 2014 Chrysler 200 has a vacuum leak. Every Chrysler 200 has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, particularly if they’re exposed to important heat or extreme fast.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, common as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less persuasive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Chrysler 200's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a automobile to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Chrysler 200’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Chrysler 200 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause distinct problems from overheating.
  • One of the most decent and many cause is that your 2014 Chrysler 200 gas cap is loose, damaged or missing. The gas cap for your 2014 Chrysler 200 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on today after you put gas in your 2014 Chrysler 200, initial thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chrysler 200 is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to distinct changes, like altitude. If your Chrysler 200 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2014 Chrysler 200 is every decisive. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did several decades ago, and they don't specifically require maintenance. The price of a new one depends on the type of Chrysler you drive, but check our present service coupons and specials.
  • New Spark Plugs or Plug Wires are essential for your 2014 Chrysler 200. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more expensive repairs.

2014 Chrysler 200 Check Engine Light

A twinkling light hints that the problem is important and if not taken care of expeditiously may result in active damage to the vehicle. If the check engine light in your 2014 Chrysler 200 starts twinkling, that means that the problem needs immediate attention and your Chrysler should be brought in expeditiously. This blinking light generally hints a severe engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can quickly expand the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair. If your check engine light is flashing, please contact our company of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro promptly by calling 3368951348.