Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2014 Jeep Cherokee will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going practical, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Jeep Cherokee light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2014 Jeep Cherokee?

When your check engine light comes on, this could be as apparent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming wear and tear to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something less alarming but a flashing check engine light hints that your vehicle’s engine is in alarming trouble and service is necessary rapidly. If your check engine light is flashing in your 2014 Jeep Cherokee, we largely recommend not to drive the vehicle and schedule Jeep service now. Below is a list of the most accepted reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Jeep Cherokee’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Jeep Cherokee will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause disparate problems from overheating.
  • Your 2014 Jeep Cherokee has a vacuum leak. Every Jeep Cherokee has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, especially if they’re exposed to important heat or extreme chilly.
  • One of the most contemporary and innumerable cause is that your 2014 Jeep Cherokee gas cap is loose, damaged or missing. The gas cap for your 2014 Jeep Cherokee serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on suddenly after you put gas in your 2014 Jeep Cherokee, first thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2014 Jeep Cherokee if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound contemporary, bring your Cherokee to Jeep and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are necessary for your 2014 Jeep Cherokee. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less lucid when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Jeep Cherokee's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the decent mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Cherokee is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to reasonable changes, like altitude. If your Jeep Cherokee is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is scanty or dead. The battery in your 2014 Jeep Cherokee is every good. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Jeep you drive, but check our routine service coupons and specials.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2014 Jeep Cherokee is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few precise ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2014 Jeep Cherokee. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of assorted things. It can be as clear as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2014 Jeep Cherokee, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Jeep service department can help you find out what code is turning your check engine light on or observe why your check engine light is flashing.

Is it safe to drive your 2014 Jeep Cherokee with the check engine light on?

If the check engine light is flashing, this means that there is a dangerous issue and it is recommended to service your Jeep Cherokee shortly. This question is not very uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is constantly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more threatening problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2014 Jeep to our certified mechanics as soon as probable.

How much does it cost to get the engine light checked?

The average price for a check engine light diagnosis & testing is often between $88 and $111. The convenient news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more relentless failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it convenient to get the excellent code reading and diagnosis.

2014 Jeep Cherokee Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear honorable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Cherokee. There are hundreds of contrasting codes that your check engine light can select. While that sounds daunting, with a little patience, tackling meaningful diagnostics will give you advantageous knowledge about your automobile and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, distinct and apt automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of usable OBD codes, there are also hundreds of usable reasons for the light, including:

  • Fuel and air metering systems problems
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Ignition system faults
  • Transmission issues
  • Emissions controls issues
  • Bad Spark Plugs
  • O2 Sensor

This is why it is profound for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a certified Jeep mechanic. If the engine light comes on due to a important concern, you risk damaging your car contrasting by not repairing the issue noble away.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help find out if your automobile is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is vital to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be interchanged. The safest bet is to decipher the code and then plan your strategy accordingly.

2014 Jeep Cherokee Check Engine Light Flashing

Although there are copious potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are copious common causes comprising something as straightforward as a loose gas cap. Extra common reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2014 Jeep Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its stringent systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is mistaken nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service productive.

Check Engine Light Service 2014 Jeep Cherokee

What do you do when you’re driving along in your Jeep Cherokee and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Jeep Cherokee checked as soon as viable. Ignoring that warning could end up causing major wear and tear to expensive engine components.

When your 2014 Jeep Cherokee's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is mostly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Jeep auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an adequate trained to designate the issue and repair it.

2014 Jeep Cherokee Check Engine Light

If the check engine light in your 2014 Jeep Cherokee starts glaring, that means that the problem needs immediate attention and your Jeep should be brought in abruptly. A glaring light indicates that the problem is harsh and if not taken care of abruptly may result in major wear and tear to the vehicle. This blinking light frequently indicates a strict engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can promptly increase the temperature of the catalytic converter to a point where damage is feasible, requiring an lavish repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our department of automotive advisors at Crown Chrysler Dodge Jeep Ram Greensboro straightaway by calling 3368951348.