Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2014 Jeep Grand Cherokee will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going convenient, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Jeep Grand Cherokee light will go off after about 20-40 miles. If you commute over that eject and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The middle cost for a check engine light diagnosis & testing is often between $88 and $111. The easy news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not well tightened to a more compelling failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it easy to get the satisfying code reading and diagnosis.

2014 Jeep Grand Cherokee Check Engine Light

If the check engine light in your 2014 Jeep Grand Cherokee starts glaring, that means that the problem needs immediate attention and your Jeep should be brought in rapidly. A glaring light indicates that the problem is relentless and if not taken care of rapidly may result in primary damage to the vehicle. This shining light usually indicates a exacting engine misfire allowing unburned fuel to be drained into the exhaust system. There it can promptly hike the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A bad, classical or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair. If your check engine light is twinkling, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro promptly by calling 3368951348.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2014 Jeep Grand Cherokee is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Jeep Grand Cherokee. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can imply a assortment of divergent things. It can be as uncomplicated as your gas cap being loose or as alarming as engine knocking. If your check engine light is on in your 2014 Jeep Grand Cherokee, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Jeep service department can help you find out what code is turning your check engine light on or scan why your check engine light is flashing.

How many miles can you drive with the check engine light?

If you check engine light is glaring, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help opt for if your vehicle is safe to drive in or if we endorse a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be changed.

2014 Jeep Grand Cherokee Check Engine Light Flashing

Although there are bountiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot easy causes including something as easy as a loose gas cap. Different easy reasons for a Check Engine Light are dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name several. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2014 Jeep Grand Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continuously detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is amiss nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service professional.

2014 Jeep Grand Cherokee Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear honest away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also commonplace as the OBD (on-board computer diagnostic system) in your Grand Cherokee. There are hundreds of definite codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling essential diagnostics will give you polite knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, conspicuous and helpful car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Transmission issues
  • O2 Sensor
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Computer output circuit issues
  • Bad Spark Plugs

This is why it is vital for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out immediately by a certified Jeep mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! If the engine light comes on due to a adequate concern, you risk damaging your car added by not repairing the issue proper away.

Check Engine Light Service 2014 Jeep Grand Cherokee

What do you do when you’re driving along in your Jeep Grand Cherokee and straightaway, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Jeep Grand Cherokee checked as soon as viable. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2014 Jeep Grand Cherokee's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is mostly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is opt for with an electronic scan tool that is used by our Jeep auto repair technicians at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced forceful to opt for the issue and repair it.

What could cause the check engine light to come on in a 2014 Jeep Grand Cherokee?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow constantly means something less unhealthy but a twinkling check engine light indicates that your vehicle’s engine is in unhealthy trouble and service is basic swiftly. If your check engine light is twinkling in your 2014 Jeep Grand Cherokee, we highly recommend not to drive the vehicle and schedule Jeep service today. Below is a list of the most prevalent reasons your check engine light can come on:

  • Your 2014 Jeep Grand Cherokee has a vacuum leak. Every Jeep Grand Cherokee has a vacuum system that performs a expanded variety of functions. The vacuum system also helps lower damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, highly if they’re exposed to exciting heat or extreme frosty.
  • New Spark Plugs or Plug Wires are basic for your 2014 Jeep Grand Cherokee. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more pricey repairs.
  • The battery is low or dead. The battery in your 2014 Jeep Grand Cherokee is every basic. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The price of a new one depends on the type of Jeep you drive, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be fewer adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Jeep Grand Cherokee's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to designate the humane mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2014 Jeep Grand Cherokee if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound natural, bring your Grand Cherokee to Jeep and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts original place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Grand Cherokee is what determines how much fuel is basic to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to accurate changes, like altitude. If your Jeep Grand Cherokee is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
  • One of the most friendly and countless cause is that your 2014 Jeep Grand Cherokee gas cap is loose, damaged or missing. The gas cap for your 2014 Jeep Grand Cherokee serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on swiftly after you put gas in your 2014 Jeep Grand Cherokee, original thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2014 Jeep Grand Cherokee’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Jeep Grand Cherokee will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause disparate problems from overheating.

Is it safe to drive your 2014 Jeep Grand Cherokee with the check engine light on?

This question is not very authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more critical problem. If the check engine light is flashing, this means that there is a critical issue and it is recommended to service your Jeep Grand Cherokee suddenly. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2014 Jeep to our certified mechanics as soon as potential.