Please wait while the page loads...

Check Engine Light Service 2014 Jeep Wrangler

What do you do when you’re driving along in your Jeep Wrangler and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Jeep Wrangler checked as soon as persuasive. Ignoring that warning could end up causing leading damage to expensive engine components.

When your 2014 Jeep Wrangler's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our Jeep auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you prefer that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional licensed to represent the issue and repair it.

2014 Jeep Wrangler Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Wrangler. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling essential diagnostics will give you favorable knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, coherent and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Transmission issues
  • O2 Sensor
  • Bad Spark Plugs
  • Computer output circuit issues
  • Fuel and air metering systems problems
  • Old Battery
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults

This is why it is satisfying for someone who does not have assorted of automotive knowledge to not assume what a code means. If the engine light comes on due to a awesome concern, you risk damaging your automobile further by not repairing the issue good away. When your check engine light comes on, you should get it checked out swiftly by a certified Jeep mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 at this moment or schedule your check engine light service online today!

2014 Jeep Wrangler Check Engine Light

A flashing light indicates that the problem is admirable and if not taken care of immediately may result in extraordinary damage to the vehicle. If the check engine light in your 2014 Jeep Wrangler starts flashing, that means that the problem needs prompt attention and your Jeep should be brought in immediately. This blinking light ordinarily indicates a strict engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can quickly enhance the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly fancy repair. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro swiftly by calling 3368951348.

How much does it cost to get the engine light checked?

The average price for a check engine light diagnosis & testing is generally between $88 and $111. The correct news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it correct to get the correct code reading and diagnosis.

What could cause the check engine light to come on in a 2014 Jeep Wrangler?

When your check engine light comes on, this could be as accepted as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A convenient glow continuously means something less perilous but a flashing check engine light hints that your vehicle’s engine is in perilous trouble and service is essential instantly. If your check engine light is flashing in your 2014 Jeep Wrangler, we exceedingly advocate not to commute the vehicle and schedule Jeep service today. Below is a list of the most accepted reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are needed for your 2014 Jeep Wrangler. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or traditional, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or break to ignition coils and O2 sensors, large to more expensive repairs.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2014 Jeep Wrangler’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Jeep Wrangler will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Wrangler is what determines how much fuel is needed to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to effective changes, like altitude. If your Jeep Wrangler is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less acceptable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause break to your catalytic converter and your 2014 Jeep Wrangler's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the proper mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • Your 2014 Jeep Wrangler has a vacuum leak. Every Jeep Wrangler has a vacuum system that performs a wide variety of functions. The vacuum system also helps deduction aggressive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, notably if they’re exposed to notable heat or extreme agreeable.
  • One of the most contemporary and countless cause is that your 2014 Jeep Wrangler gas cap is loose, damaged or missing. The gas cap for your 2014 Jeep Wrangler serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on rapidly after you put gas in your 2014 Jeep Wrangler, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2014 Jeep Wrangler if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound natural, bring your Wrangler to Jeep and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, notably aftermarket parts and accessories, or using OEM parts first place might rate a little bit more but could save you money from having to get scanty function and break caused by scanty installation function corrected.
  • The battery is low or dead. The battery in your 2014 Jeep Wrangler is every important. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Jeep you drive, but check our extant service coupons and specials.

2014 Jeep Wrangler Check Engine Light Flashing

Although there are many likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent adequate causes incorporating something as classic as a loose gas cap. Further adequate reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name many. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2014 Jeep Wrangler was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the computerized control company. If the computerized control company detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is inaccurate nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service high-tech.

What Does the Check Engine Light Mean?

One of the most naturally misunderstood lights or indicators in your 2014 Jeep Wrangler is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Jeep Wrangler. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can designate a variety of further things. It can be as simple as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2014 Jeep Wrangler, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Jeep service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing.

Is it safe to drive your 2014 Jeep Wrangler with the check engine light on?

If the check engine light is flashing, this means that there is a perilous issue and it is recommended to service your Jeep Wrangler instantly. This question is not very uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more perilous problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and bring your 2014 Jeep to our certified technicians as soon as probable.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help express if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a harmful sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is not uncomplicated to predict how copious miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy properly.

Will the check engine light reset itself?

The check engine light on your 2014 Jeep Wrangler will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going obvious, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Jeep Wrangler light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.