Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2014 Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few assorted ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a variety of things for your 2014 Ram 3500. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of divergent things. It can be as distinguishable as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your 2014 Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Ram service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

2014 Ram 3500 Check Engine Light Flashing

Although there are bountiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful known causes including something as routine as a loose gas cap. Different known reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2014 Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its helpful systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is erroneous nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Excessively Qualified Service effective.

Check Engine Light Service 2014 Ram 3500

What do you do when you’re driving along in your Ram 3500 and promptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Ram 3500 checked as soon as probable. Ignoring that warning could end up causing major damage to expensive engine parts.

When your 2014 Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t constitutional, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic investigate tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an compelling professional to choose the issue and repair it.

2014 Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of particular codes that your check engine light can opt for. While that sounds daunting, with a little patience, tackling noteworthy diagnostics will give you practical knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, particular and apt vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Emissions controls issues
  • O2 Sensor
  • Transmission issues
  • Ignition system faults
  • Computer output circuit issues

This is why it is meaningful for someone who does not have a few of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! If the engine light comes on due to a threatening concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out hastily by a certified Ram mechanic.

2014 Ram 3500 Check Engine Light

If the check engine light in your 2014 Ram 3500 starts flashing, that means that the problem needs sudden attention and your Ram should be brought in instantly. A flashing light indicates that the problem is scrupulous and if not taken care of instantly may result in major damage to the vehicle. This blinking light typically indicates a strict engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can quickly improve the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A intrusive, classical or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro suddenly by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a exceptionally expensive repair.

Will the check engine light reset itself?

The check engine light on your 2014 Ram 3500 will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going practical, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Ram 3500 light will go off after about 20-40 miles. If you commute over that reward and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2014 Ram 3500?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a harsh problem that could cause harsh damage to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less harsh but a flashing check engine light indicates that your vehicle’s engine is in harsh trouble and service is decisive expeditiously. If your check engine light is flashing in your 2014 Ram 3500, we immensely endorse not to drive the vehicle and schedule Ram service today. Below is a list of the most known reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or substitute item can wreak havoc on your 2014 Ram 3500 if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound common, bring your 3500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2014 Ram 3500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause substitute problems from overheating.
  • Your 2014 Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to efficient heat or extreme bleak.
  • One of the most ongoing and frequent cause is that your 2014 Ram 3500 gas cap is loose, damaged or missing. The gas cap for your 2014 Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2014 Ram 3500, original thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to favor the right variety of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 3500 is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • The battery is low or dead. The battery in your 2014 Ram 3500 is every perilous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't surely require maintenance. The price of a new one depends on the type of Ram you drive, but check our actual service coupons and specials.
  • New Spark Plugs or Plug Wires are crucial for your 2014 Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, primary to more expensive repairs.

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replenished. Since each check engine code has its own level of severity, it is difficult to predict how copious miles you can travel to work with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help opt for if your vehicle is safe to travel to work in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

Is it safe to drive your 2014 Ram 3500 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is normally indicated by a ordinary glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more dangerous problem. If the check engine light is flashing, this means that there is a dangerous issue and it is recommended to service your Ram 3500 promptly. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and bring your 2014 Ram to our certified mechanics as soon as probable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it excellent to get the factual code reading and diagnosis. The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The excellent news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to aid find out the cause of your check engine light.