Please wait while the page loads...

How much does it cost to get the engine light checked?

The average price for a check engine light diagnosis & testing is continuously between $88 and $111. The marvelous news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more threatening failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it marvelous to get the practical code reading and diagnosis.

2016 Chrysler Pacifica Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Pacifica. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling vital diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, evident and available vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of probable OBD codes, there are also hundreds of probable reasons for the light, including:

  • Bad Spark Plugs
  • Transmission issues
  • Computer output circuit issues
  • Ignition system faults
  • O2 Sensor
  • Old Battery
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap

This is why it is critical for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a alarming concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out abruptly by a certified Chrysler mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

2016 Chrysler Pacifica Check Engine Light

If the check engine light in your 2016 Chrysler Pacifica starts flashing, that means that the problem needs prompt attention and your Chrysler should be brought in instantly. A flashing light indicates that the problem is relentless and if not taken care of instantly may result in big damage to the vehicle. This blinking light usually expresses a rigorous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously increase the temperature of the catalytic converter to a point where damage is achievable, requiring an lavish repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair. If your check engine light is twinkling, please contact our team of automotive mentors at Crown Chrysler Dodge Jeep Ram Greensboro immediately by calling 3368951348.

Is it safe to drive your 2016 Chrysler Pacifica with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is generally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more combative problem. If the check engine light is twinkling, this means that there is a combative issue and it is recommended to service your Chrysler Pacifica shortly. Call the specialists at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2016 Chrysler to our certified mechanics as soon as practical.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2016 Chrysler Pacifica is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Chrysler Pacifica. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can find out a variety of diversified things. It can be as straightforward as your gas cap being loose or as dangerous as engine knocking. If your check engine light is on in your 2016 Chrysler Pacifica, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Chrysler service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is blinking.

Check Engine Light Service 2016 Chrysler Pacifica

What do you do when you’re driving along in your Chrysler Pacifica and instantly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Chrysler Pacifica checked as soon as viable. Ignoring that warning could end up causing leading damage to expensive engine components.

When your 2016 Chrysler Pacifica's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic diagnose tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively honorable code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced expert to determine the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2016 Chrysler Pacifica will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Chrysler Pacifica light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2016 Chrysler Pacifica Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various normal causes including something as authentic as a loose gas cap. Other normal reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was serviced.

Every 2016 Chrysler Pacifica was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service trained.

What could cause the check engine light to come on in a 2016 Chrysler Pacifica?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical damage to your engine and come with a exceptional repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less critical but a flashing check engine light hints that your vehicle’s engine is in critical trouble and service is needed shortly. If your check engine light is flashing in your 2016 Chrysler Pacifica, we highly recommend not to drive the car and schedule Chrysler service today. Below is a list of the most admitted reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Chrysler Pacifica’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with each Chrysler service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Chrysler Pacifica will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause different problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Chrysler Pacifica is what determines how much fuel is fundamental to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Chrysler Pacifica is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2016 Chrysler Pacifica is each vital. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't truly require maintenance. The price of a new one depends on the type of Chrysler you drive, but check our ongoing service coupons and specials.
  • Your 2016 Chrysler Pacifica has a vacuum leak. Each Chrysler Pacifica has a vacuum system that performs a extensive variety of functions. The vacuum system also helps lower precarious emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, especially if they’re exposed to profound heat or extreme bleak.
  • New Spark Plugs or Plug Wires are fundamental for your 2016 Chrysler Pacifica. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or erstwhile, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more pricey repairs.
  • One of the most familiar and innumerable cause is that your 2016 Chrysler Pacifica gas cap is loose, damaged or missing. The gas cap for your 2016 Chrysler Pacifica serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on quickly after you put gas in your 2016 Chrysler Pacifica, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or different item can wreak havoc on your 2016 Chrysler Pacifica if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the car from starting. If these issues sound prominent, bring your Pacifica to Chrysler and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, prominent as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less dependable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Chrysler Pacifica's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help determine if your vehicle is able to drive in or if we suggest a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.