Please wait while the page loads...

What could cause the check engine light to come on in a 2016 Ram 1500?

When your check engine light comes on, this could be as prevailing as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow frequently means something less serious but a flashing check engine light suggests that your vehicle’s engine is in serious trouble and service is crucial immediately. If your check engine light is flashing in your 2016 Ram 1500, we hugely advocate not to drive the vehicle and schedule Ram service now. Below is a list of the most prevailing reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2016 Ram 1500 if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound appreciative, bring your 1500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get low work and wear and tear caused by low installation work corrected.
  • One of the most sufficient and frequent cause is that your 2016 Ram 1500 gas cap is loose, damaged or missing. The gas cap for your 2016 Ram 1500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on swiftly after you put gas in your 2016 Ram 1500, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the sum of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2016 Ram 1500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2016 Ram 1500 has a vacuum leak. Each Ram 1500 has a vacuum system that performs a wide variety of functions. The vacuum system also helps decrease aggressive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to dominant heat or extreme brisk.
  • New Spark Plugs or Plug Wires are essential for your 2016 Ram 1500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, leading to more fancy repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Ram 1500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with each Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Ram 1500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
  • The battery is low or dead. The battery in your 2016 Ram 1500 is each basic. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The value of a new one depends on the type of Ram you drive, but check our current service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 1500 is what determines how much fuel is essential to run your engine efficiently by measuring the sum of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to accessible changes, like altitude. If your Ram 1500 is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

Check Engine Light Service 2016 Ram 1500

What do you do when you’re driving along in your Ram 1500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Ram 1500 checked as soon as attainable. Ignoring that warning could end up causing prime damage to expensive engine components.

When your 2016 Ram 1500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t constitutional, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively cheap code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced trained to suggest the issue and repair it.

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2016 Ram 1500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2016 Ram 1500. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a collection of understandable things. It can be as classic as your gas cap being loose or as dangerous as engine knocking. If your check engine light is on in your 2016 Ram 1500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is flashing.

2016 Ram 1500 Check Engine Light

If the check engine light in your 2016 Ram 1500 starts flashing, that means that the problem needs immediate attention and your Ram should be brought in today. A flashing light indicates that the problem is alarming and if not taken care of today may result in big damage to the vehicle. This shining light usually expresses a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly surge the temperature of the catalytic converter to a point where damage is attainable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can fully be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive specialists at Crown Chrysler Dodge Jeep Ram Greensboro expeditiously by calling 3368951348.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help determine if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is hard to predict how copious miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

2016 Ram 1500 Check Engine Light Flashing

Although there are innumerable potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several prevailing causes including something as straightforward as a loose gas cap. Other prevailing reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was serviced.

Every 2016 Ram 1500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its vital systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is sorry nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Notably Qualified Service professional.

How much does it cost to get the engine light checked?

The central value for a check engine light diagnosis & testing is usually between $88 and $111. The exceptional news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help imply the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the careful code reading and diagnosis.

Is it safe to drive your 2016 Ram 1500 with the check engine light on?

This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more aggressive problem. If the check engine light is twinkling, this means that there is a aggressive issue and it is recommended to service your Ram 1500 shortly. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and bring your 2016 Ram to our certified mechanics as soon as likely.

Will the check engine light reset itself?

The check engine light on your 2016 Ram 1500 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going equitable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Ram 1500 light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2016 Ram 1500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard shortly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 1500. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling large diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear-cut and correct vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of applicable OBD codes, there are also hundreds of applicable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Computer output circuit issues
  • Transmission issues
  • Bad Spark Plugs
  • Ignition system faults
  • Fuel and air metering systems problems
  • Old Battery
  • Emissions controls issues

This is why it is necessary for someone who does not have a few of automotive knowledge to not assume what a code means. If the engine light comes on due to a unsafe concern, you risk contentious your car additional by not repairing the issue right away. When your check engine light comes on, you should get it checked out suddenly by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!