Please wait while the page loads...

2018 Chrysler 300 Check Engine Light

A blinking light indicates that the problem is persuasive and if not taken care of expeditiously may result in mighty damage to the vehicle. If the check engine light in your 2018 Chrysler 300 starts blinking, that means that the problem needs hasty attention and your Chrysler should be brought in expeditiously. This blinking light commonly indicates a stern engine misfire allowing unused fuel to be discharged into the exhaust system. There it can abruptly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a immensely expensive repair. If your check engine light is glaring, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro promptly by calling 3368951348.

What could cause the check engine light to come on in a 2018 Chrysler 300?

When your check engine light comes on, this could be as plain as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less unhealthy but a flashing check engine light illustrates that your vehicle’s engine is in unhealthy trouble and service is needed straightaway. If your check engine light is flashing in your 2018 Chrysler 300, we incredibly advise not to drive the vehicle and schedule Chrysler service today. Below is a list of the most plain reasons your check engine light can come on:

  • Issues with all aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2018 Chrysler 300 if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound simple, bring your 300 to Chrysler and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Chrysler 300’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don't get it fixed, your 2018 Chrysler 300 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause further problems from overheating.
  • One of the most simple and frequent cause is that your 2018 Chrysler 300 gas cap is loose, damaged or missing. The gas cap for your 2018 Chrysler 300 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on urgently after you put gas in your 2018 Chrysler 300, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less exact when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Chrysler 300's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chrysler 300 is what determines how much fuel is imperative to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to aware changes, like altitude. If your Chrysler 300 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are imperative for your 2018 Chrysler 300. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.
  • The battery is low or dead. The battery in your 2018 Chrysler 300 is every memorable. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The rate of a new one depends on the type of Chrysler you drive, but check our extant service coupons and specials.
  • Your 2018 Chrysler 300 has a vacuum leak. Every Chrysler 300 has a vacuum system that performs a expansive variety of functions. The vacuum system also helps decrease harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to memorable heat or extreme chilled.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help suggest if your vehicle is safe to drive in or if we endorse a tow truck. It could be anything from a destructive sensor to plug wires needing to be changed. The safest bet is to decipher the code and then plan your strategy accordingly.

2018 Chrysler 300 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just additional name for check engine light codes. These are automotive computer codes stored by the ECM, also admitted as the OBD (on-board computer diagnostic system) in your 300. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling necessary diagnostics will give you ample knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, conspicuous and ample vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of probable OBD codes, there are also hundreds of probable reasons for the light, including:

  • Computer output circuit issues
  • Ignition system faults
  • Bad Spark Plugs
  • Emissions controls issues
  • Old Battery
  • Transmission issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor

This is why it is terrific for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Chrysler mechanic. If the engine light comes on due to a important concern, you risk damaging your car further by not repairing the issue right away. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more alarming failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it essential to get the essential code reading and diagnosis. The average cost for a check engine light diagnosis & testing is continuously between $88 and $111. The essential news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light.

Is it safe to drive your 2018 Chrysler 300 with the check engine light on?

This question is not very evident because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more adequate problem. If the check engine light is flashing, this means that there is a adequate issue and it is recommended to service your Chrysler 300 shortly. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2018 Chrysler to our certified mechanics as soon as feasible.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2018 Chrysler 300 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2018 Chrysler 300. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name plentiful. With that being said, the check engine light can determine a variety of diversified things. It can be as natural as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2018 Chrysler 300, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Chrysler service department can help you find out what code is turning your check engine light on or inspect why your check engine light is glaring. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

Check Engine Light Service 2018 Chrysler 300

What do you do when you’re driving along in your Chrysler 300 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Chrysler 300 checked as soon as convenient. Ignoring that warning could end up causing major damage to pricey engine parts.

When your 2018 Chrysler 300's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced licensed to select the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2018 Chrysler 300 will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going possible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Chrysler 300 light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2018 Chrysler 300 Check Engine Light Flashing

Although there are copious potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few prevalent causes including something as prevalent as a loose gas cap. Diverse prevalent reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was fixed.

Every 2018 Chrysler 300 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its meaningful systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what fully is wrong nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service experienced.