Please wait while the page loads...

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is blinking, we represent that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help select if your vehicle is safe to drive in or if we represent a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

Check Engine Light Service 2018 Ram 1500

What do you do when you’re driving along in your Ram 1500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Ram 1500 checked as soon as adequate. Ignoring that warning could end up causing lanky damage to expensive engine components.

When your 2018 Ram 1500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is ordinarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ram auto repair technicians at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively small code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained technical to choose the issue and repair it.

How much does it cost to get the engine light checked?

The middle price for a check engine light diagnosis & testing is usually between $88 and $111. The lucrative news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to assist read the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it lucrative to get the convincing code reading and diagnosis.

Will the check engine light reset itself?

The check engine light on your 2018 Ram 1500 will commonly shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going exact, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Ram 1500 light will go off after about 20-40 miles. If you drive over that deposit and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2018 Ram 1500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 1500. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling primary diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and functional vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of accessible OBD codes, there are also hundreds of accessible reasons for the light, including:

  • Old Battery
  • Ignition system faults
  • Emissions controls issues
  • Transmission issues
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • Bad Spark Plugs
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap

This is why it is exceptional for someone who does not have various of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out instantly by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 straightaway or schedule your check engine light service online today! If the engine light comes on due to a serious concern, you risk detrimental your car divergent by not repairing the issue right away.

What Does the Check Engine Light Mean?

One of the most constantly misunderstood lights or indicators in your 2018 Ram 1500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few various ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2018 Ram 1500. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can illustrate a variety of divergent things. It can be as simple as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2018 Ram 1500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or analyze why your check engine light is flashing.

2018 Ram 1500 Check Engine Light

A glaring light indicates that the problem is rigorous and if not taken care of immediately may result in considerable damage to the vehicle. If the check engine light in your 2018 Ram 1500 starts glaring, that means that the problem needs abrupt attention and your Ram should be brought in immediately. This blinking light usually indicates a draconian engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is ready for use, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A harmful, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a exceedingly expensive repair. If your check engine light is glaring, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro straightaway by calling 3368951348.

What could cause the check engine light to come on in a 2018 Ram 1500?

When your check engine light comes on, this could be as prevailing as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a dangerous problem that could cause dangerous damage to your engine and come with a valuable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something less dangerous but a twinkling check engine light indicates that your vehicle’s engine is in dangerous trouble and service is basic suddenly. If your check engine light is twinkling in your 2018 Ram 1500, we incredibly endorse not to drive the vehicle and schedule Ram service at this moment. Below is a list of the most logical reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, noted as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less helpful when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Ram 1500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the right assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • One of the most prevalent and frequent cause is that your 2018 Ram 1500 gas cap is loose, damaged or missing. The gas cap for your 2018 Ram 1500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on at this moment after you put gas in your 2018 Ram 1500, first thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 1500 is what determines how much fuel is crucial to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to friendly changes, like altitude. If your Ram 1500 is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2018 Ram 1500 is every necessary. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did various decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our ongoing service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2018 Ram 1500 if it’s not installed properly. These aftermarket parts and accessories can ditch the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prevailing, bring your 1500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might rate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your 2018 Ram 1500 has a vacuum leak. Every Ram 1500 has a vacuum system that performs a important variety of functions. The vacuum system also helps lower down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, especially if they’re exposed to extraordinary heat or extreme cold.
  • New Spark Plugs or Plug Wires are crucial for your 2018 Ram 1500. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Ram 1500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2018 Ram 1500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.

Is it safe to drive your 2018 Ram 1500 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more terrible problem. If the check engine light is blinking, this means that there is a terrible issue and it is recommended to service your Ram 1500 immediately. Call the consultants at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2018 Ram to our certified mechanics as soon as relevant.

2018 Ram 1500 Check Engine Light Flashing

Although there are countless capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various accepted causes including something as common as a loose gas cap. Extra accepted reasons for a Check Engine Light are a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name innumerable. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2018 Ram 1500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the mechanical control squad. If the mechanical control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service competent.