Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2018 Ram 2500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2018 Ram 2500. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a lot. With that being said, the check engine light can pick a collection of discernible things. It can be as comfortable as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2018 Ram 2500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining.

Will the check engine light reset itself?

The check engine light on your 2018 Ram 2500 will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did innumerable of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Ram 2500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more critical failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the available code reading and diagnosis. The central cost for a check engine light diagnosis & testing is normally between $88 and $111. The exceptional news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light.

Is it safe to drive your 2018 Ram 2500 with the check engine light on?

This question is not exceedingly singular because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is continuously indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more hazardous problem. If the check engine light is shining, this means that there is a hazardous issue and it is recommended to service your Ram 2500 urgently. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and deliver your 2018 Ram to our certified mechanics as soon as probable.

2018 Ram 2500 Check Engine Light

If the check engine light in your 2018 Ram 2500 starts flashing, that means that the problem needs immediate attention and your Ram should be transported in instantly. A flashing light suggests that the problem is critical and if not taken care of instantly may result in major damage to the vehicle. This blinking light usually indicates a stringent engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can urgently raise the temperature of the catalytic converter to a point where damage is likely, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can fully be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly lavish repair. If your check engine light is shining, please contact our team of automotive consultants at Crown Chrysler Dodge Jeep Ram Greensboro hastily by calling 3368951348.

Check Engine Light Service 2018 Ram 2500

What do you do when you’re driving along in your Ram 2500 and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Ram 2500 checked as soon as factual. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2018 Ram 2500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t fitting, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced trained to determine the issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to aid determine if your automobile is safe to drive in or if we endorse a tow truck. Since each check engine code has its own level of severity, it is complicated to predict how copious miles you can drive with the warning light on.

What could cause the check engine light to come on in a 2018 Ram 2500?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a huge repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is mandatory swiftly. If your check engine light is flashing in your 2018 Ram 2500, we extremely advocate not to drive the vehicle and schedule Ram service at this moment. Below is a list of the most prevalent reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Ram 2500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2018 Ram 2500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause substitute problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 2500 is what determines how much fuel is needed to run your engine efficiently by measuring the eject of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to functional changes, like altitude. If your Ram 2500 is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2018 Ram 2500 has a vacuum leak. Every Ram 2500 has a vacuum system that performs a roomy variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceedingly if they’re exposed to imposing heat or extreme brisk.
  • New Spark Plugs or Plug Wires are needed for your 2018 Ram 2500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
  • The battery is low or dead. The battery in your 2018 Ram 2500 is every accessible. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did copious decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Ram you drive, but check our ongoing service coupons and specials.
  • One of the most current and copious cause is that your 2018 Ram 2500 gas cap is loose, damaged or missing. The gas cap for your 2018 Ram 2500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on straightaway after you put gas in your 2018 Ram 2500, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or substitute item can wreak havoc on your 2018 Ram 2500 if it’s not installed accurately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound familiar, bring your 2500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceedingly aftermarket parts and accessories, or using OEM parts first place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the eject of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less possible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Ram 2500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

2018 Ram 2500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also prevalent as the OBD (on-board computer diagnostic system) in your 2500. There are hundreds of specific codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling basic diagnostics will give you correct knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, discernable and helpful car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Ignition system faults
  • Old Battery
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Computer output circuit issues
  • Bad Spark Plugs
  • O2 Sensor

This is why it is mandatory for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a perilous concern, you risk harmful your car further by not repairing the issue right away. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 now or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out rapidly by a certified Ram mechanic.

2018 Ram 2500 Check Engine Light Flashing

Although there are innumerable ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful ordinary causes including something as uncomplicated as a loose gas cap. Other ordinary reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a lot. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2018 Ram 2500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its intense systems. The sensors are generally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is wrong nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service licensed.