Please wait while the page loads...

Is it safe to drive your 2018 Ram 3500 with the check engine light on?

This question is not very uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be steady to commute. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more memorable problem. If the check engine light is flashing, this means that there is a memorable issue and it is recommended to service your Ram 3500 instantly. Call the mentors at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and bring your 2018 Ram to our certified mechanics as soon as attainable.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2018 Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a fluctuate of things for your 2018 Ram 3500. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can learn a variety of different things. It can be as prevalent as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your 2018 Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining.

Will the check engine light reset itself?

The check engine light on your 2018 Ram 3500 will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going good, and you did many of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Ram 3500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2018 Ram 3500?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a threatening problem that could cause threatening wear and tear to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something less threatening but a flashing check engine light indicates that your vehicle’s engine is in threatening trouble and service is needed immediately. If your check engine light is flashing in your 2018 Ram 3500, we tremendously recommend not to drive the vehicle and schedule Ram service today. Below is a list of the most accepted reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are essential for your 2018 Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, extensive to more pricey repairs.
  • The battery is low or dead. The battery in your 2018 Ram 3500 is every agreeable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Ram you drive, but check our refined service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, natural as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less compelling when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2018 Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Ram 3500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it revamped, your 2018 Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause distinct problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Ram 3500 is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2018 Ram 3500 if it’s not installed well. These aftermarket parts and accessories can deposit the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound typical, bring your 3500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, very aftermarket parts and accessories, or using OEM parts first place might price a little bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.
  • One of the most typical and many cause is that your 2018 Ram 3500 gas cap is loose, damaged or missing. The gas cap for your 2018 Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on abruptly after you put gas in your 2018 Ram 3500, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2018 Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a gargantuan collection of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, very if they’re exposed to intense heat or extreme enraged.

2018 Ram 3500 Check Engine Light Flashing

Although there are bountiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several amicable causes consisting something as specific as a loose gas cap. Further amicable reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Mechanics and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2018 Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its necessary systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is remorseful nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service professional.

2018 Ram 3500 Check Engine Light

A flashing light suggests that the problem is risky and if not taken care of immediately may result in abundant damage to the vehicle. If the check engine light in your 2018 Ram 3500 starts flashing, that means that the problem needs sudden attention and your Ram should be brought in immediately. This blinking light frequently illustrates a scrupulous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our squad of automotive veterans at Crown Chrysler Dodge Jeep Ram Greensboro shortly by calling 3368951348.

Check Engine Light Service 2018 Ram 3500

What do you do when you’re driving along in your Ram 3500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Ram 3500 checked as soon as feasible. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2018 Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t practical, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic investigate tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively cheap code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to indicate the issue and repair it.

2018 Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also noted as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling vital diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and convenient vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of viable OBD codes, there are also hundreds of viable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • O2 Sensor
  • Emissions controls issues
  • Bad Spark Plugs
  • Old Battery
  • Fuel and air metering systems problems
  • Ignition system faults
  • Computer output circuit issues

This is why it is alarming for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a unsafe concern, you risk damaging your car extra by not repairing the issue right away. When your check engine light comes on, you should get it checked out suddenly by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since any check engine code has its own level of severity, it is prime to predict how frequent miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help select if your vehicle is protected to drive in or if we endorse a tow truck.

How much does it cost to get the engine light checked?

The central cost for a check engine light diagnosis & testing is naturally between $88 and $111. The amazing news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help choose the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it amazing to get the ready for use code reading and diagnosis.