Please wait while the page loads...

How much does it cost to get the engine light checked?

The average value for a check engine light diagnosis & testing is typically between $88 and $111. The exceptional news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more scrupulous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the handy code reading and diagnosis.

2019 Ram 2500 Check Engine Light Flashing

Although there are bountiful viable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot prevalent causes including something as easy as a loose gas cap. Other prevalent reasons for a Check Engine Light are faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name bountiful. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2019 Ram 2500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the computerized control squad. If the computerized control squad detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what altogether is incorrect nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

Check Engine Light Service 2019 Ram 2500

What do you do when you’re driving along in your Ram 2500 and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ram 2500 checked as soon as ability. Ignoring that warning could end up causing major wear and tear to expensive engine components.

When your 2019 Ram 2500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t good, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced high-tech to mean the issue and repair it.

2019 Ram 2500 Check Engine Light

A shining light expresses that the problem is hazardous and if not taken care of urgently may result in major damage to the vehicle. If the check engine light in your 2019 Ram 2500 starts shining, that means that the problem needs precipitous attention and your Ram should be brought in urgently. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A destructive, long-established or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro urgently by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Will the check engine light reset itself?

The check engine light on your 2019 Ram 2500 will typically shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going dependable, and you did several of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ram 2500 light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2019 Ram 2500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 2500. There are hundreds of added codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling dangerous diagnostics will give you practical knowledge about your automobile and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Regrettably, discernable and helpful automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • O2 Sensor
  • Computer output circuit issues
  • Emissions controls issues
  • Transmission issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Bad Spark Plugs
  • Ignition system faults

This is why it is mandatory for someone who does not have various of automotive knowledge to not assume what a code means. If the engine light comes on due to a miraculous concern, you risk damaging your car extra by not repairing the issue right away. When your check engine light comes on, you should get it checked out abruptly by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2019 Ram 2500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ram 2500. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name various. With that being said, the check engine light can mean a variety of disparate things. It can be as authentic as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2019 Ram 2500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

What could cause the check engine light to come on in a 2019 Ram 2500?

When your check engine light comes on, this could be as common as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unsafe problem that could cause unsafe damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow typically means something less unsafe but a glaring check engine light indicates that your vehicle’s engine is in unsafe trouble and service is decisive now. If your check engine light is glaring in your 2019 Ram 2500, we extremely suggest not to drive the car and schedule Ram service straightaway. Below is a list of the most regular reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your 2019 Ram 2500 if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prevailing, bring your 2500 to Ram and have our squad of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get meager function and damage caused by meager installation function corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the jettison of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less applicable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Ram 2500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to read the right variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Ram 2500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ram 2500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause back-up problems from overheating.
  • The battery is meager or dead. The battery in your 2019 Ram 2500 is every hard. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did various decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of Ram you drive, but check our ongoing service coupons and specials.
  • One of the most commonplace and frequent cause is that your 2019 Ram 2500 gas cap is loose, damaged or missing. The gas cap for your 2019 Ram 2500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on urgently after you put gas in your 2019 Ram 2500, first thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 2500 is what determines how much fuel is imperative to run your engine efficiently by measuring the jettison of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to aware changes, like altitude. If your Ram 2500 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2019 Ram 2500 has a vacuum leak. Every Ram 2500 has a vacuum system that performs a colossal variety of functions. The vacuum system also helps lower destructive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to profound heat or extreme chilly.
  • New Spark Plugs or Plug Wires are imperative for your 2019 Ram 2500. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience meager performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, enormous to more pricey repairs.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is troublesome to predict how many miles you can drive with the warning light on. If you check engine light is twinkling, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help indicate if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a destructive sensor to plug wires needing to be replaced.

Is it safe to drive your 2019 Ram 2500 with the check engine light on?

If the check engine light is flashing, this means that there is a perilous issue and it is recommended to service your Ram 2500 rapidly. This question is not highly prevalent because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is naturally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more alarming problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and deliver your 2019 Ram to our certified mechanics as soon as possible.