Please wait while the page loads...

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. If you check engine light is flashing, we suggest that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help find out if your vehicle is safe to drive in or if we suggest a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how plentiful miles you can drive with the warning light on.

Check Engine Light Service 2019 Ram 3500

What do you do when you’re driving along in your Ram 3500 and expeditiously, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ram 3500 checked as soon as sane. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2019 Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t common, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an adequate professional to indicate the issue and repair it.

2019 Ram 3500 Check Engine Light Flashing

Although there are countless capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful prevalent causes consisting something as straightforward as a loose gas cap. Divergent prevalent reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was serviced.

Every 2019 Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is sorry nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Very Qualified Service professional.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a contentious catalytic converter or a problem with one of the car's oxygen sensors, so it admirable to get the suitable code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The admirable news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to aid opt for the cause of your check engine light.

2019 Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also attentive as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of odd codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling mandatory diagnostics will give you comfortable knowledge about your automobile and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, satisfying and helpful automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Emissions controls issues
  • Old Battery
  • Transmission issues
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Computer output circuit issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults

This is why it is thought-provoking for someone who does not have bountiful of automotive knowledge to not assume what a code means. If the engine light comes on due to a strict concern, you risk harmful your car supplemental by not repairing the issue right away. When your check engine light comes on, you should get it checked out expeditiously by a certified Ram mechanic. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today!

Will the check engine light reset itself?

The check engine light on your 2019 Ram 3500 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going marvelous, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ram 3500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2019 Ram 3500?

When your check engine light comes on, this could be as attentive as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a great repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow naturally means something less hazardous but a flashing check engine light indicates that your vehicle’s engine is in hazardous trouble and service is necessary immediately. If your check engine light is flashing in your 2019 Ram 3500, we very advocate not to drive the vehicle and schedule Ram service today. Below is a list of the most typical reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are fundamental for your 2019 Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Ram 3500’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause diverse problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 3500 is what determines how much fuel is fundamental to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to first changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2019 Ram 3500 if it’s not installed accordingly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prominent, deliver your 3500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts first place might value a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • One of the most daily and frequent cause is that your 2019 Ram 3500 gas cap is loose, damaged or missing. The gas cap for your 2019 Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2019 Ram 3500, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2019 Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they’re exposed to potent heat or extreme cold.
  • The battery is low or dead. The battery in your 2019 Ram 3500 is every noteworthy. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did several decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our present service coupons and specials.

2019 Ram 3500 Check Engine Light

A flashing light indicates that the problem is alarming and if not taken care of instantly may result in major damage to the vehicle. If the check engine light in your 2019 Ram 3500 starts flashing, that means that the problem needs prompt attention and your Ram should be brought in instantly. This shining light commonly suggests a stern engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can quickly improve the temperature of the catalytic converter to a point where damage is usable, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can exclusively be the cause. A bad, classical or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive advisors at Crown Chrysler Dodge Jeep Ram Greensboro hastily by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2019 Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ram 3500. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name countless. With that being said, the check engine light can suggest a variety of straightforward things. It can be as straightforward as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2019 Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring.

Is it safe to drive your 2019 Ram 3500 with the check engine light on?

This question is not very common because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a essential glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. If the check engine light is flashing, this means that there is a serious issue and it is recommended to service your Ram 3500 expeditiously. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2019 Ram to our certified mechanics as soon as possible.