Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2020 Jeep Compass will ordinarily shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did plentiful of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Jeep Compass light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

2020 Jeep Compass Check Engine Light

If the check engine light in your 2020 Jeep Compass starts flashing, that means that the problem needs immediate attention and your Jeep should be brought in promptly. A flashing light indicates that the problem is effective and if not taken care of promptly may result in big damage to the car. This blinking light constantly expresses a severe engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A damaging, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a remarkably expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro shortly by calling 3368951348.

2020 Jeep Compass Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard instantly lights up, but in reality, it is not something that should cause you to shut down in fear honorable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also accepted as the OBD (on-board computer diagnostic system) in your Compass. There are hundreds of discrete codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling dominant diagnostics will give you suitable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, distinct and discernible vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of functional OBD codes, there are also hundreds of functional reasons for the light, including:

  • Computer output circuit issues
  • Ignition system faults
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Bad Spark Plugs
  • O2 Sensor
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues

This is why it is tremendous for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out swiftly by a certified Jeep mechanic. If the engine light comes on due to a unstable concern, you risk damaging your car extra by not repairing the issue humane away.

What could cause the check engine light to come on in a 2020 Jeep Compass?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a harsh problem that could cause harsh damage to your engine and come with a extensive repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something fewer harsh but a flashing check engine light indicates that your vehicle’s engine is in harsh trouble and service is paramount immediately. If your check engine light is flashing in your 2020 Jeep Compass, we hugely recommend not to drive the vehicle and schedule Jeep service today. Below is a list of the most common reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the fee of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less detailed when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2020 Jeep Compass's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the decent mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Jeep Compass’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Jeep service. If you have an issue with your catalytic converter and don't get it fixed, your 2020 Jeep Compass will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • The battery is poor or dead. The battery in your 2020 Jeep Compass is every imperative. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Jeep you drive, but check our current service coupons and specials.
  • Your 2020 Jeep Compass has a vacuum leak. Every Jeep Compass has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, highly if they’re exposed to intense heat or extreme cool.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep Compass is what determines how much fuel is needed to run your engine efficiently by measuring the fee of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Jeep Compass is having trouble starting, idling rough or has a swift change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2020 Jeep Compass. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, big to more lavish repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2020 Jeep Compass if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound ongoing, bring your Compass to Jeep and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get poor function and wear and tear caused by poor installation function corrected.
  • One of the most acceptable and many cause is that your 2020 Jeep Compass gas cap is loose, damaged or missing. The gas cap for your 2020 Jeep Compass serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on immediately after you put gas in your 2020 Jeep Compass, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it gargantuan to get the satisfying code reading and diagnosis. The average rate for a check engine light diagnosis & testing is naturally between $88 and $111. The gargantuan news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help hint the cause of your check engine light.

2020 Jeep Compass Check Engine Light Flashing

Although there are many capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various modern causes including something as friendly as a loose gas cap. Distinct modern reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was fixed.

Every 2020 Jeep Compass was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its extraordinary systems. The sensors are generally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is mistaken nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service skilled.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be changed. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can travel to work with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is twinkling, we suggest that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help determine if your vehicle is protected to travel to work in or if we suggest a tow truck.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2020 Jeep Compass is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few other ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2020 Jeep Compass. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of contrasting things. It can be as visible as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2020 Jeep Compass, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Jeep service department can help you determine what code is turning your check engine light on or diagnose why your check engine light is flashing.

Check Engine Light Service 2020 Jeep Compass

What do you do when you’re driving along in your Jeep Compass and immediately, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks a meager because you have meager idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Jeep Compass checked as soon as feasible. Ignoring that warning could end up causing large damage to expensive engine components.

When your 2020 Jeep Compass's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Jeep auto repair technicians at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively exact code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced technical to elect for the issue and repair it.

Is it safe to drive your 2020 Jeep Compass with the check engine light on?

If the check engine light is shining, this means that there is a unsafe issue and it is recommended to service your Jeep Compass immediately. This question is not incredibly authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more treacherous problem. Call the advisors at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or cut down your speed and deliver your 2020 Jeep to our certified technicians as soon as viable.