Please wait while the page loads...

2020 Ram 1500 Check Engine Light Flashing

Although there are bountiful likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several innate causes including something as classic as a loose gas cap. Further innate reasons for a Check Engine Light are damaged oxygen sensor, faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2020 Ram 1500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its difficult systems. The sensors are continuously detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is sorry nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service skilled.

2020 Ram 1500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also admitted as the OBD (on-board computer diagnostic system) in your 1500. There are hundreds of understandable codes that your check engine light can select. While that sounds daunting, with a scant patience, tackling admitted diagnostics will give you applicable knowledge about your vehicle and will also allow that Check Engine Light to do what it is surely supposed to do: be your guide. Unfortunately, clear and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Emissions controls issues
  • O2 Sensor
  • Transmission issues
  • Computer output circuit issues

This is why it is wonderful for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a hazardous concern, you risk harmful your car further by not repairing the issue right away. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Ram mechanic.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not well tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it plentiful to get the appropriate code reading and diagnosis. The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The plentiful news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light.

What could cause the check engine light to come on in a 2020 Ram 1500?

When your check engine light comes on, this could be as distinguishable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous wear and tear to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less perilous but a flashing check engine light suggests that your vehicle’s engine is in perilous trouble and service is imperative urgently. If your check engine light is flashing in your 2020 Ram 1500, we tremendously advise not to drive the vehicle and schedule Ram service today. Below is a list of the most routine reasons your check engine light can come on:

  • One of the most understandable and frequent cause is that your 2020 Ram 1500 gas cap is loose, damaged or missing. The gas cap for your 2020 Ram 1500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2020 Ram 1500, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Ram 1500 is what determines how much fuel is imperative to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Ram 1500 is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2020 Ram 1500 is every intense. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did several decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our elaborate service coupons and specials.
  • New Spark Plugs or Plug Wires are imperative for your 2020 Ram 1500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or erstwhile, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, central to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or supplemental item can wreak havoc on your 2020 Ram 1500 if it’s not installed well. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound feasible, bring your 1500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might price a microscopic bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Ram 1500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Ram 1500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause supplemental problems from overheating.
  • Your 2020 Ram 1500 has a vacuum leak. Every Ram 1500 has a vacuum system that performs a roomy variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to dominant heat or extreme congenial.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less effective when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2020 Ram 1500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to read the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a automobile to fail an emissions test.

Will the check engine light reset itself?

The check engine light on your 2020 Ram 1500 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Ram 1500 light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

Is it safe to drive your 2020 Ram 1500 with the check engine light on?

This question is not excessively easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more draconian problem. If the check engine light is twinkling, this means that there is a draconian issue and it is recommended to service your Ram 1500 rapidly. Call the advisors at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your 2020 Ram to our certified mechanics as soon as reasonable.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help pick if your vehicle is safe to drive in or if we endorse a tow truck. Since each check engine code has its own level of severity, it is not uncomplicated to predict how copious miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be interchanged. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2020 Ram 1500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2020 Ram 1500. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name several. With that being said, the check engine light can mean a variety of peculiar things. It can be as pragmatic as your gas cap being loose or as alarming as engine knocking. If your check engine light is on in your 2020 Ram 1500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or probe why your check engine light is shining.

Check Engine Light Service 2020 Ram 1500

What do you do when you’re driving along in your Ram 1500 and instantly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Ram 1500 checked as soon as probable. Ignoring that warning could end up causing big damage to expensive engine elements.

When your 2020 Ram 1500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the mechanical control system that it can’t superb, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional professional to indicate the issue and repair it.

2020 Ram 1500 Check Engine Light

A flashing light implies that the problem is exacting and if not taken care of instantly may result in major wear and tear to the vehicle. If the check engine light in your 2020 Ram 1500 starts flashing, that means that the problem needs precipitous attention and your Ram should be brought in instantly. This blinking light regularly indicates a draconian engine misfire allowing unburned fuel to be drained into the exhaust system. There it can immediately surge the temperature of the catalytic converter to a point where damage is usable, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro instantly by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly expensive repair.