Please wait while the page loads...

Check Engine Light Service Chrysler 200

What do you do when you’re driving along in your Chrysler 200 and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Chrysler 200 checked as soon as feasible. Ignoring that warning could end up causing major damage to pricey engine components.

When your Chrysler 200's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t valuable, a computer turns on your check engine light. This amber or yellow light is continually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is pick with an electronic diagnose tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced expert to pick the issue and repair it.

Is it safe to drive your Chrysler 200 with the check engine light on?

This question is not very effortless because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is consistently indicated by a instinctive glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more risky problem. If the check engine light is glaring, this means that there is a risky issue and it is recommended to service your Chrysler 200 promptly. Call the mentors at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your Chrysler to our certified mechanics as soon as probable.

Chrysler 200 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 200. There are hundreds of divergent codes that your check engine light can mean. While that sounds daunting, with a tiny patience, tackling basic diagnostics will give you suitable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, coherent and suitable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of logical OBD codes, there are also hundreds of logical reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Fuel and air metering systems problems
  • Old Battery
  • Bad Spark Plugs
  • Computer output circuit issues
  • Emissions controls issues
  • Ignition system faults
  • O2 Sensor

This is why it is curious for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 now or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Chrysler mechanic. If the engine light comes on due to a risky concern, you risk harmful your car added by not repairing the issue right away.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is blinking, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help pick if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy subsequently.

Chrysler 200 Check Engine Light Flashing

Although there are several potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several normal causes including something as classic as a loose gas cap. Distinct normal reasons for a Check Engine Light are a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was serviced.

Every Chrysler 200 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its necessary systems. The sensors are continually detecting conditions while sending data to the electrical control team. If the electrical control team detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is awry nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Hugely Qualified Service professional.

Chrysler 200 Check Engine Light

A flashing light indicates that the problem is strict and if not taken care of immediately may result in major damage to the automobile. If the check engine light in your Chrysler 200 starts flashing, that means that the problem needs immediate attention and your Chrysler should be transported in immediately. This blinking light usually hints a exacting engine misfire allowing unburned fuel to be drained into the exhaust system. There it can abruptly increase the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can surely be the cause. A bad, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is flashing, please contact our team of automotive veterans at Crown Chrysler Dodge Jeep Ram Greensboro immediately by calling 3368951348.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more forceful failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it terrific to get the apt code reading and diagnosis. The average cost for a check engine light diagnosis & testing is normally between $88 and $111. The terrific news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help choose the cause of your check engine light.

Will the check engine light reset itself?

The check engine light on your Chrysler 200 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going acceptable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Chrysler 200 light will go off after about 20-40 miles. If you commute over that payment and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Chrysler 200 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Chrysler 200. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a assortment of distinctive things. It can be as straightforward as your gas cap being loose or as dangerous as engine knocking. If your check engine light is on in your Chrysler 200, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Chrysler service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is blinking.

What could cause the check engine light to come on in a Chrysler 200?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a important repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less precarious but a flashing check engine light indicates that your vehicle’s engine is in precarious trouble and service is mandatory immediately. If your check engine light is flashing in your Chrysler 200, we tremendously recommend not to drive the vehicle and schedule Chrysler service today. Below is a list of the most established reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less factual when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your Chrysler 200's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your Chrysler 200 is every strict. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The value of a new one depends on the type of Chrysler you commute, but check our extant service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chrysler 200 is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to distinct changes, like altitude. If your Chrysler 200 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your Chrysler 200 has a vacuum leak. Every Chrysler 200 has a vacuum system that performs a expanded mixture of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, very if they’re exposed to persuasive heat or extreme afraid.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Chrysler 200’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don't get it repaired, your Chrysler 200 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause back-up problems from overheating.
  • New Spark Plugs or Plug Wires are mandatory for your Chrysler 200. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, primary to more expensive repairs.
  • One of the most regular and frequent cause is that your Chrysler 200 gas cap is loose, damaged or missing. The gas cap for your Chrysler 200 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on shortly after you put gas in your Chrysler 200, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your Chrysler 200 if it’s not installed well. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound natural, bring your 200 to Chrysler and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, very aftermarket parts and accessories, or using OEM parts first place might value a tiny bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.