Please wait while the page loads...

Chrysler Town and Country Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Town and Country. There are hundreds of alternative codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling mandatory diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernable and prepared vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Old Battery
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • O2 Sensor
  • Emissions controls issues
  • Transmission issues

This is why it is satisfactory for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 now or schedule your check engine light service online today! If the engine light comes on due to a awesome concern, you risk damaging your car extra by not repairing the issue right away. When your check engine light comes on, you should get it checked out hastily by a certified Chrysler mechanic.

Will the check engine light reset itself?

The check engine light on your Chrysler Town and Country will consistently shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Chrysler Town and Country light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

Since all check engine code has its own level of severity, it is troublesome to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accurately. If you check engine light is shining, we advocate that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help imply if your vehicle is safe to drive in or if we advocate a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Chrysler Town and Country is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Chrysler Town and Country. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a lot. With that being said, the check engine light can mean a variety of odd things. It can be as available as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your Chrysler Town and Country, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Chrysler service department can help you find out what code is turning your check engine light on or analyze why your check engine light is flashing.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The polite news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help suggest the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not well tightened to a more perilous failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it polite to get the suitable code reading and diagnosis.

What could cause the check engine light to come on in a Chrysler Town and Country?

When your check engine light comes on, this could be as accepted as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a miraculous problem that could cause miraculous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow frequently means something less miraculous but a flashing check engine light indicates that your vehicle’s engine is in miraculous trouble and service is needed immediately. If your check engine light is flashing in your Chrysler Town and Country, we highly recommend not to drive the vehicle and schedule Chrysler service today. Below is a list of the most amicable reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be changed. The Oxygen sensor, chummy as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Chrysler Town and Country's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to learn the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • New Spark Plugs or Plug Wires are needed for your Chrysler Town and Country. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience honest performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more lavish repairs.
  • Your Chrysler Town and Country has a vacuum leak. Every Chrysler Town and Country has a vacuum system that performs a expanded mixture of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to competent heat or extreme cheerful.
  • Your mass airflow sensor (known as MAF) needs to be changed. The mass airflow sensor in your Chrysler Town and Country is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Chrysler Town and Country is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Chrysler Town and Country’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Chrysler service. If you have an issue with your catalytic converter and don't get it repaired, your Chrysler Town and Country will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause contrasting problems from overheating.
  • One of the most classic and frequent cause is that your Chrysler Town and Country gas cap is loose, damaged or missing. The gas cap for your Chrysler Town and Country serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on immediately after you put gas in your Chrysler Town and Country, original thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or contrasting item can wreak havoc on your Chrysler Town and Country if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound straightforward, bring your Town and Country to Chrysler and have our department of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might cost a little bit more but could save you money from having to get honest work and damage caused by honest installation work corrected.
  • The battery is low or dead. The battery in your Chrysler Town and Country is every unusual. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The price of a new one depends on the type of Chrysler you drive, but check our current service coupons and specials.

Chrysler Town and Country Check Engine Light

If the check engine light in your Chrysler Town and Country starts flashing, that means that the problem needs immediate attention and your Chrysler should be transported in expeditiously. A flashing light hints that the problem is perilous and if not taken care of expeditiously may result in substantial wear and tear to the vehicle. This blinking light mostly indicates a severe engine misfire allowing unburned fuel to be drained into the exhaust system. There it can hastily surge the temperature of the catalytic converter to a point where damage is ready for use, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our company of automotive advisors at Crown Chrysler Dodge Jeep Ram Greensboro hastily by calling 3368951348. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.

Chrysler Town and Country Check Engine Light Flashing

Although there are countless achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several regular causes including something as easy as a loose gas cap. Other regular reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Chrysler Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chrysler issue was serviced.

Every Chrysler Town and Country was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are consistently detecting conditions while sending data to the electrical control unit. If the electrical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is remorseful nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service active.

Is it safe to drive your Chrysler Town and Country with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more exceptional problem. If the check engine light is glaring, this means that there is a exceptional issue and it is recommended to service your Chrysler Town and Country shortly. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and bring your Chrysler to our certified mechanics as soon as conceivable.

Check Engine Light Service Chrysler Town and Country

What do you do when you’re driving along in your Chrysler Town and Country and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Chrysler owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t designate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Chrysler Town and Country checked as soon as achievable. Ignoring that warning could end up causing major damage to lavish engine components.

When your Chrysler Town and Country's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t sufficient, a computer turns on your check engine light. This amber or yellow light is continually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Chrysler auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled skilled to indicate the issue and repair it.