Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy subsequently. Since each check engine code has its own level of severity, it is substantial to predict how many miles you can drive with the warning light on. It could be anything from a detrimental sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help determine if your vehicle is safe to drive in or if we recommend a tow truck.

Dodge Check Engine Light Flashing

Although there are copious potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several common causes incorporating something as classic as a loose gas cap. Back-up common reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your issue was fixed.

Every Dodge was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its dominant systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is inaccurate nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service high-tech.

What could cause the check engine light to come on in a Dodge?

When your check engine light comes on, this could be as exact as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a detectable problem that could cause detectable wear and tear to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less detectable but a blinking check engine light implies that your vehicle’s engine is in detectable trouble and service is crucial immediately. If your check engine light is blinking in your Dodge, we tremendously endorse not to drive the vehicle and schedule service today. Below is a list of the most prevalent reasons your check engine light can come on:

  • The battery is low or dead. The battery in your Dodge is every meaningful. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of you travel to work, but check our current service coupons and specials.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your Dodge if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound aware, bring your Dodge to and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM parts original place might cost a slight bit more but could save you money from having to get poor function and damage caused by poor installation function corrected.
  • One of the most present and several cause is that your Dodge gas cap is loose, damaged or missing. The gas cap for your Dodge serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your Dodge, original thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your Dodge has a vacuum leak. Every Dodge has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down destructive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, particularly if they’re exposed to exciting heat or extreme frosty.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, aware as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less persuasive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Dodge's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right collection of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a automobile to fail an emissions test.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your Dodge’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every service. If you have an issue with your catalytic converter and don't get it repaired, your Dodge will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause diverse problems from overheating.
  • New Spark Plugs or Plug Wires are needed for your Dodge. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Dodge is what determines how much fuel is needed to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to affable changes, like altitude. If your Dodge is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Dodge is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your Dodge. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of divergent things. It can be as authentic as your gas cap being loose or as harsh as engine knocking. If your check engine light is on in your Dodge, contact Crown Chrysler Dodge Jeep Ram Greensboro. Our service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Crown Chrysler Dodge Jeep Ram Greensboro today!

Will the check engine light reset itself?

The check engine light on your Dodge will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Dodge light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

Check Engine Light Service Dodge

What do you do when you’re driving along in your Dodge and quickly, a yellow light flashes on your dash and says "Check Engine". If you’re like most owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t choose you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Dodge checked as soon as ready for use. Ignoring that warning could end up causing big damage to costly engine components.

When your Dodge's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t small, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional expert to prefer the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more curious failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it suitable to get the suitable code reading and diagnosis. The average price for a check engine light diagnosis & testing is often between $88 and $111. The suitable news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

Dodge Check Engine Light

A flashing light illustrates that the problem is important and if not taken care of urgently may result in considerable damage to the vehicle. If the check engine light in your Dodge starts flashing, that means that the problem needs immediate attention and your should be brought in urgently. This blinking light frequently illustrates a important engine misfire allowing unused fuel to be discharged into the exhaust system. There it can instantly surge the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A harmful, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our department of automotive experts at Crown Chrysler Dodge Jeep Ram Greensboro shortly by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a exceedingly expensive repair.

Dodge Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Dodge. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling imperative diagnostics will give you agreeable knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, distinct and appropriate vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of careful OBD codes, there are also hundreds of careful reasons for the light, including:

  • Bad Spark Plugs
  • O2 Sensor
  • Transmission issues
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Old Battery
  • Ignition system faults

This is why it is clear for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a certified mechanic. If the engine light comes on due to a alarming concern, you risk harmful your car added by not repairing the issue right away.

Is it safe to drive your Dodge with the check engine light on?

If the check engine light is blinking, this means that there is a harsh issue and it is recommended to service your Dodge immediately. This question is not very plain because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is consistently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more severe problem. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or reduce your speed and deliver your to our certified mechanics as soon as probable.