Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your Ram 3500 will ordinarily shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going active, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Ram 3500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Crown Chrysler Dodge Jeep Ram Greensboro so the light and code can be double-checked and reset.

Ram 3500 Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many routine causes including something as classic as a loose gas cap. Divergent routine reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name several. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every Ram 3500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its intense systems. The sensors are naturally detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is culpable nor what to do about it. That’s where we come in; Crown Chrysler Dodge Jeep Ram Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service skilled.

How much does it cost to get the engine light checked?

The average price for a check engine light diagnosis & testing is constantly between $88 and $111. The excellent news, Crown Chrysler Dodge Jeep Ram Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it excellent to get the suitable code reading and diagnosis.

How many miles can you drive with the check engine light?

Since any check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we endorse that you pull over and contact Crown Chrysler Dodge Jeep Ram Greensboro to help mean if your vehicle is secure to drive in or if we endorse a tow truck.

Check Engine Light Service Ram 3500

What do you do when you’re driving along in your Ram 3500 and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Ram 3500 checked as soon as feasible. Ignoring that warning could end up causing major damage to expensive engine components.

When your Ram 3500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t awesome, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Ram auto repair mechanics at Crown Chrysler Dodge Jeep Ram Greensboro. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced technological to suggest the issue and repair it.

Ram 3500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard instantly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also noted as the OBD (on-board computer diagnostic system) in your 3500. There are hundreds of contrasting codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling necessary diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, conspicuous and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

  • Transmission issues
  • Emissions controls issues
  • Computer output circuit issues
  • Ignition system faults
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Old Battery

This is why it is essential for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Crown Chrysler Dodge Jeep Ram Greensboro at 3368951348 today or schedule your check engine light service online today! If the engine light comes on due to a awesome concern, you risk damaging your car added by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Ram mechanic.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Ram 3500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinct ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Ram 3500. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a collection of disparate things. It can be as plain as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your Ram 3500, contact Crown Chrysler Dodge Jeep Ram Greensboro. Contact Crown Chrysler Dodge Jeep Ram Greensboro today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

Is it safe to drive your Ram 3500 with the check engine light on?

This question is not very visible because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be pragmatic to drive. This is commonly indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more breathtaking problem. If the check engine light is twinkling, this means that there is a breathtaking issue and it is recommended to service your Ram 3500 at this moment. Call the experts at Crown Chrysler Dodge Jeep Ram Greensboro by dialing 3368951348 so you can describe the issues. Or lower your speed and bring your Ram to our certified mechanics as soon as possible.

What could cause the check engine light to come on in a Ram 3500?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow naturally means something less unhealthy but a flashing check engine light indicates that your vehicle’s engine is in unhealthy trouble and service is fundamental hastily. If your check engine light is flashing in your Ram 3500, we notably advocate not to drive the vehicle and schedule Ram service today. Below is a list of the most familiar reasons your check engine light can come on:

  • One of the most acceptable and copious cause is that your Ram 3500 gas cap is loose, damaged or missing. The gas cap for your Ram 3500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your Ram 3500, original thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 3500 is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to critical changes, like altitude. If your Ram 3500 is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, noted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your Ram 3500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to read the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your Ram 3500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Crown Chrysler Dodge Jeep Ram Greensboro offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your Ram 3500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • New Spark Plugs or Plug Wires are crucial for your Ram 3500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, principal to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your Ram 3500 if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound appreciative, transport your 3500 to Ram and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might value a small bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.
  • The battery is low or dead. The battery in your Ram 3500 is every principal. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Ram you drive, but check our current service coupons and specials.
  • Your Ram 3500 has a vacuum leak. Every Ram 3500 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, especially if they’re exposed to extraordinary heat or extreme brisk.

Ram 3500 Check Engine Light

A flashing light illustrates that the problem is rigid and if not taken care of hastily may result in big damage to the vehicle. If the check engine light in your Ram 3500 starts flashing, that means that the problem needs immediate attention and your Ram should be brought in hastily. This blinking light usually indicates a rare engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can expeditiously increase the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can altogether be the cause. A bad, aged or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our team of automotive consultants at Crown Chrysler Dodge Jeep Ram Greensboro suddenly by calling 3368951348. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair.